Out Of This World Proper Placement Of Cabinet Pulls

When it comes to cabinet pulls placement for drawers under 24 pulls are most often centered and installed in the middle of the drawer panel.

Proper placement of cabinet pulls. Use the same 2 12 3 range when installing pulls. Hardware cabinet placement is a critical part of bringing the aesthetics of a room together. When drawers are 24 wide or wider we often like to double up on knobs or pulls.

To place this hardware correctly divide the drawer into thirds and place the hardware in the left and right portions of the drawer. This creates a really clean high touch finishing look for your cabinetry. On base cabinets they are placed 2-12 to 3 from the upper corner of the door.

On lower cabinets place knob holes 2-12 down from the top of the door. When placing your pulls remember that the 1 to 4 range based on your personal preference from the top or bottom edge of the drawer is the ideal placement. For upper cabinets the bottom screw should be in that range and the top screw will depend on how long your pull is.

From our Calabasas Remodel. However in case of a base cabinet its best to stick with knob placement in the area that is 25 to 3 inches from upper corner. The placement must be opposite to hinge spot of door.

Cabinet pulls have two screws as opposed to only one screw with a knob. Cabinet knobs and pulls are almost always centered horizontally on the door stile vertical door frame piece. Here simply follow the rule of thirds.

The guideline for hanging cabinet pulls is the same as hanging knobs ie. One method is placing two pulls on the drawer. On the Drawer of.